Merchandise covered by a manufacturer’s warranty is sold with the warranty by the 
        manufacturer extended to the purchaser. We will be happy to assist in obtaining fulfillment of a manufacturer’s 
        warranty. Other than applicable manufacturers’ warranties, there are no warranties, express or implied, 
        including any warranty of merchantability or fitness for a particular purpose. The only tires SimpleTire can 
        warranty are brand new defects (meaning that they have not been mounted or driven on). Any bead damaged will be 
        void of any warranty claim. Any other adjustments should be taken to the nearest authorized dealer for that 
        manufacturer. Sometimes the manufacturer also provides a treadlife warranty and mileage rating. Please be aware 
        that not all tires hold a mileage warranty from the manufacturer. Different tire models, even from the same 
        manufacturer, may or may not come with a treadlife warranty.

This tire features run flat technology that’s designed to assist the driver during a puncture of pressure loss.

Low rolling resistance tires are designed to reduce the energy loss as a tire rolls, decreasing the required rolling effort, improving vehicle fuel efficiency.

Specially designed to decrease the noise that a tire makes while on the road, often with a noise-dampening foam on the inside of the tire.

Maximum speed capability to safely carry a load for an extended period of time.

The maximum carrying capacity for a tire determined by the manufacturer.

The maximum load carrying strength at the specified inflation pressure, also known as ply rating.

Standards that measure treadwear, temperature resistance and traction, example: "640 A A".  The 640 is the treadwear test and it lasted 6.4 times longer than the comparison tire tested against.  The first "A" is the traction rating using straight-line wet traction on test surfaces (see information tables tab) and the second "A" is the temperature rating by testing operation at high speeds without heat-related failure (see information tables tab).

The side of the tire between the tread and rim, with cosmetic branding as well as information about the tire including manufacturer, model, size, etc.

A three-peak mountain snowflake (3PMSF) symbol branded on a tire's sidewall indicates the tire meets required performance criteria in snow testing to be considered severe snow service-rated.

An identifier of a particular tire line and size combination assigned by the tire manufacturer.

The highest inflation pressure (measured in pounds of force per square inch, PSI) the tire is designed to contain, and should only be used when called for by the vehicle placard.

Measured in 32nds of an inch, this metric shows how much tread life is left on a tire, with the tire's traction & stopping capabilities greatly diminished at 4/32nds and less. Tire manufacturers include "tire wear bars" at 2/32nds to indicate when your tire is worn out.

The diameter of a tire that is inflated without any load applied.

The measurement of width from a tires inner sidewall to the outer sidewall.

The range of widths the rim of the vehicle can be for this tire to be safely mounted on.

Most popular 2005 Honda Insight tires

In stock

In stock

In stock

In stock

In stock

In stock

In stock

In stock

Best Rated 2005 Honda Insight tires

In stock

In stock

In stock

In stock

In stock

In stock

In stock

In stock

Browse 2005 Honda Insight tires by Trim and Size.

Did you find what you were looking for?

Did you find what
you were looking for?